Description
This product with high performance, less dosage, multi-purpose, fully able to meet the anti-wear hydraulic, hydraulic transmission oil requirements.
Recommended Dosage
The recommended dosage is 0.8-1.5%
Typical Characteristics
|
Item |
Typical Value |
Test Methods |
|
Appearance |
Yellow to light brown transparent liquid |
Visual inspection |
|
Density ,20℃,g/cm3 |
1.1-1.2 |
GB/T1884 |
|
Viscosity,40℃mm2/s |
≥60 |
GB/T265 |
|
Flash points,℃ |
≥180 |
GB/T207 |
|
Phosphorus content，% |
≤ 6 |
SH/T0296 |
|
Sulfur content，% |
≤8 |
SH/T0303 |
|
Zn content,% |
≤5.0 |
SH/T0226 |
|
Nitrogen content,% |
Trace |
SH/T0224 |
Packing：The product is packed in 200 liter drum. (net weight: 200Kg/drum).
Storage：
1.The best blend temperature is 60 ~ 70 ℃
2.Beforemixed with other additives, it must be tested.
3.Inwinter, not to usetofireto heat it directly.
4.Sealed storage, to prevent impuritiesand water. According to the quality of oil, sometimes need to add demulsifier additive.
MORE
Description
The agent has excellent extreme pressure anti-wear, anti-rust, anti-corrosion, excellent oxidation stability and significant energy savings properties. Under high-speed impact, could prevent gear abrasion, wear, pitting and spalling effectively; in high temperature, high load conditions, could prevent the formation of sludge to keep the tooth surface clean; in wet and water environment, could prevent corrosion of gear surfaces. Can be used to prepare different viscosity and quality of industrial gear oil and automotive gear oil.
Recommended Dosage
|
Middle load industrial gear oil |
Heavy loadindustrial gear oil |
GL-4 automotive gear oil |
GL-5 automotive gear oil |
|
1.2~1.5% |
2.0% |
2.2~2.5% |
4.4~5.0% |
Typical Characteristics
|
Item |
Typical Value |
Test Methods |
|
Appearance |
Red brown transparent liquid |
Visual inspection |
|
Density ,20℃,g/cm3 |
1.1-1.2 |
GB/T1884 |
|
Kinematic viscosity,（100℃）,mm/s |
≥8 |
GB/T265 |
|
Flash points, (Open)℃ |
≥100 |
GB/T207 |
|
Phosphorus content，% |
≥2.2 |
SH/T0296 |
|
Sulfur content，% |
≥26~30 |
SH/T0303 |
|
Nitrogen content，% |
≥0.5 |
SH/T0224 |
|
Cu-strip Corrosion, rating（120℃，3h） |
≤1 |
GB/T5096 |
|
Mechanical impurities ,% |
≤0.05 |
GB/T511 |
|
Water,% |
≤0.1 |
GB/T0225 |
Packing：The product is packed in 200 liter drum. (net weight: 200Kg/drum).
Storage：Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .
MORE
Description
BF7600 isdeveloped on the basis of comprehensive evaluation of thermal stability, oxidation stability and heat transfer of heat- transfer oil. This product can be widely used in various open and closed heat transfer systems.
Recommended dosage
|
Item |
L-QB 280 |
L-QB 300 |
L-QB 320 |
|
Dosage |
0.3% |
0.5% |
0.7% |
Typical Characteristics
|
Item |
Typical Value |
Test methods |
|
Density（20℃）Kg/m3 |
870-920 |
GB/T1884 GB/T1885 |
|
Kinematic viscosity, mm2/s, at 100oC |
15-25 |
GB/T265 |
|
Water % |
≤0.1 |
GB/T260 |
|
Thermal stability |
320°C，720h |
SH/T0680 |
|
Appearance |
Red brown oil liquid |
Visual inspection |
Packing and storage
Packing: The product is packed in 200 liter metal drum.
Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
MORE
Description
BF1500 engine oil additive package with high-performance and passed the bench test. It is formulated by metal detergent, ash-less dispersant and compound antioxidant. It has excellent high temperature detergency, dispersibility, anti-corrosion and anti-wear properties. The CF-4 grade diesel oil prepared by this product can meet the oil requirements of high-speed and four-stroke diesel engines, save fuel consumption and reduce piston deposits, and it is especially suitable for heavy-duty diesel locomotive driving on the expressway.
Use this additive package at 9.8% (m / m) dosage can adjust SAE30, 40,50,15W40, 20W40 viscosity grade of CF-4 or SJ / CF-4 level of engine oil , these engine oils were all meet the API CF-4 Diesel oil requirements. At the same time this product can be modulated SD / CC, CE, SF / CD, SG and other viscosity levels of engine oil.
Recommended Dosage
|
API Grade |
Recommended Dosage（W%） |
TBN |
|
CF-4 |
9.8 |
10 |
|
SD/CC |
4 |
/ |
|
CE |
5.4 |
/ |
|
SF/CD |
6 |
/ |
|
SG |
8 |
/ |
|
SJ |
11 |
/ |
Typical Characteristics
|
Item |
Typical Value |
Test Methods |
|
Density（20℃）,Kg/m3 |
Report |
GB/T 1884 |
|
TBN㎎KOH/g |
≥108 |
SH/T 0251 |
|
Water % |
≤0.18 |
GB/T 260 |
|
Phosphorus content %（m/m） |
≥0.65 |
SH/T 0296 |
|
Sulfur content（m/m） |
≥1.92 |
GB/T 388 |
|
Cacontent %（m/m） |
≥4.2 |
SH/T 0270 |
|
Zn content %（m/m） |
≥0.88 |
SH/T 0226 |
|
N content %（m/m） |
≥0.46 |
SH/T 0224 |
Packing：The product is packed in 200 liter drum. (net weight: 200Kg/drum).
Storage：Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .
MORE
Description
The engine oil formulated with this product has excellent dispersibility, abrasion resistance, corrosion resistance and rust resistance. The API CH-4 with add this product with the viscosity level of 10W / 30, 10W / 40, 15W / 40 and 20W / 50. All pass the MS program test and Ⅲ test bench
Recommended dosage
The reocommend dosage is 13.5% for the API CH-4.
Typical Characteristics
|
Item |
Typical Value |
Test methods |
|
Flash point (open) °C |
≥180 |
GB/T267 |
|
Kinematic viscosity, mm2/s,at100oC |
Report |
GB/T265 |
|
TBN mg KOH/g |
≥90 |
GB/T0251 |
|
Phosphorus %(m/m) |
≥0.6 |
SH/T0296 |
|
Nitrogen %(m/m) |
≥0.5 |
SH/T0224 |
|
Zinc %(m/m) |
≥0.75 |
SH/T0226 |
|
Calcium %(m/m) |
≥3.0 |
SH/T0270 |
Packing and storage
Packing: The product is packed in 200 liter metal drum，net weight is 190Kg/Drum
Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
MORE
Chinese